search

Deutz 1012 Especificações Página 280

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 282
  • Índice
  • MARCADORES
    • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 279
Service Training
Section 4.9
Page 54
12.05
ADJUSTING THE CO CONTENT
Prerequisites for adjustment:
- Firing point checked and if necessary corrected: desired value 18 ± 2 ° before TDC
(from 01/2005: 8 ± 2 ° before TDC).
- With truck warmed up, hydraulic oil at 60 – 70 °C, operating hydraulics pressure relief valve set to 265
bar.
- Parking brake locked in braked position.
Adjustment:
- Turn idling mixture adjustment screw (3) to its limit stop and then unscrew by three turns.
- Connect CO meter.
- Start engine and when truck is warmed up at a low idling speed (750 – 800 rpm) determine CO value.
Target value: CO ≤ 0.1 % by volume
If CO > 0.1 % by volume, unscrew screw (3) more, engine must be running in idling mode
but clearly regularly.
- Place full-load mixture adjustment screw (2) in the middle between L and R (the screw is located at the
gas intake in the mixer).
- Connect CO meter.
- With the footbrake on, bring the engine to maximum running speed, activate tilt control lever fully to the
limit stop and hold there, at the same time turn the steering to the limit stop too, and hold, thereby applying
a load to the engine.
- Determine CO value of the engine under this load.
Target value: CO ≤ 0.1 % by volume
Correction: To reduce CO value = turn adjustment screw in direction L.
To increase CO value = turn adjustment screw in direction R.
(to enhance engine performance)
NOTE: The engine cannot be set to this setting with a running speed lower than 1750 rpm.
In models with catalysers, the speed cannot go below 1850 rpm.
- Screw in limit stop screw (9) against limit stop (8) to the point that when pressing the magnet axis up to
the limit stop, the running speed is kept at about 500 rpm.
Vista de página 279
1 2 ... 275 276 277 278 279 280 281 282

Comentários a estes Manuais

Sem comentários
Manuais e produtos relacionados com Motor Deutz 1012
Motor Deutz 1013 Manual do Utilizador   (6 páginas)

Acnodes KD 5154 manuály

Uživatelské manuály a uživatelské příručky pro Vstupní zařízení Acnodes KD 5154.
Poskytujeme 1 manuály pdf Acnodes KD 5154 ke stažení zdarma podle typů dokumentů: Uživatelský manuál


Acnodes KD 5154 Uživatelský manuál (23 strany)


Značka: Acnodes | Kategorie: The input devices | Velikost: 0.45 MB |

 

Tabulka s obsahem

Rack Mount

1

LCD-Keyboard Drawer

1

CONTENTS

3

Introduction

5

Safety Guidelines

6

Unpacking

8

External Views

9

Setup and Operating Guide

10

Side ViewOSD Controls

10

Top ViewAudio Components

11

Back ViewConnectors

12

System Requirements

13

Rack Installation

14

OSD Controls

18

Using the OSD

19

OSD Menu System

20

Troubleshooting Techniques

22

Technical Specifications

23




Další produkty a příručky pro Vstupní zařízení Acnodes

Modely Typ Dokumentu
RK 1008B Uživatelský manuál   Acnodes RK 1008B User Manual, 10 stránky
M 1716 Uživatelský manuál   Acnodes M 1716 User Manual, 28 stránky
M 2916 Uživatelský manuál   Acnodes M 2916 User Manual, 27 stránky
KD 81712 Uživatelský manuál   Acnodes KD 81712 User Manual, 22 stránky
KDM 81912 Uživatelský manuál   Acnodes KDM 81912 User Manual, 20 stránky
KDM 8190 Uživatelský manuál   Acnodes KDM 8190 User Manual, 16 stránky
M 3932 Uživatelský manuál   Acnodes M 3932 User Manual, 27 stránky
KD 8172 Uživatelský manuál   Acnodes KD 8172 User Manual, 17 stránky
KDM 83712 Uživatelský manuál   Acnodes KDM 83712 User Manual, 22 stránky
MKDH 8190C Uživatelský manuál   Acnodes MKDH 8190C User Manual, 16 stránky
KDS 6170 Uživatelský manuál   Acnodes KDS 6170 User Manual [en] , 18 stránky
M 2232 Uživatelský manuál   Acnodes M 2232 User Manual, 27 stránky
KD 8228 Uživatelský manuál   Acnodes KD 8228 User Manual, 22 stránky
MKD 6117 Uživatelský manuál   Acnodes MKD 6117 User Manual, 19 stránky
RK 2008B Uživatelský manuál   Acnodes RK 2008B User Manual, 10 stránky
KDS 82216 Uživatelský manuál   Acnodes KDS 82216 User Manual, 25 stránky
KDM 8270D Uživatelský manuál   Acnodes KDM 8270D User Manual, 18 stránky
KDX 81712 Uživatelský manuál   Acnodes KDX 81712 User Manual, 24 stránky
MKD 9192D Uživatelský manuál   Acnodes MKD 9192D User Manual, 14 stránky
RK 1200B Uživatelský manuál   Acnodes RK 1200B User Manual, 9 stránky

  • AOpen PGS RL Flo-Master Unique Gas Products Festool
  • Jenn-Air Gavetas de aquecimento Rolls Fontes de alimentação ininterrupta (UPS) Apple Barebones PC/estação de trabalho Neff Micro-ondas Parasound Equipamento de gravação
  • Bang & Olufsen BeoPort Samsung MG23F302TQK LG ND1520 Acer X1383WH
  • Samsung BD-F5500K Manual do Utilizador Philips Jamie Oliver HomeCooker Manual do Utilizador Canon PowerShot SX620 HS Manual do Utilizador AirCell ST 3100 Manual do Utilizador Sony DSC-HX200V Manual do Utilizador

    • © 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.029 s |
    Manymanuals.com Manymanuals.de Manymanuals.fr Manymanuals.it
    Manymanuals.pl Manymanuals.cz Manymanuals.es Manymanuals-pt.com